Distribution and biology of two sympatric Phaleria species (Coleoptera : Tenebrionidae) on Maltese sandy beaches

Differences in the zonation and habitat preferences of two sympatric Phaleria species on five Maltese sandy beaches were investigated. P. bimaculata has a more seaward zonation than P. acuminata and occurs at higher densities. Behavioural aspects of the two species were also investigated in the laboratory through the use of choice chambers. The two species have similar sand moisture content and grain-size preferences, and a similar phenology, but different sand organic content preferencespeer-reviewe

Double-Axis Rotary Shadowing for High-Resolution Scanning Electron Microscopy

Thin continuous metal coatings and a scanning electron microscope-generated spot size in the range of the visualized particles, are necessary prerequisites if one hopes to extract high-resolution topographic information in the scanning electron microscope. Chemical fixation and dehydration in organic solvents at room temperature lead to severe ultrastructural artifacts which can be avoided by cryofixation and freeze-drying of the specimen. 0.9 to 2.7 nm thick homogeneous layers of chromium and germanium can be deposited onto the surface of cryofixed and freeze-dried specimens at high sub-zero temperatures by electron beam evaporation using double-axis rotary shadowing . Theoretical calculations of the layer geometry of a double-axis rotary shadowed hemisphere and practical experiments on periodical test specimens demonstrate the usefulness of this technique. The resolution obtainable in an in-lens field emission scanning electron microscope is close to transmission electron microscope studies and image reconstructions of the same specimens. Double-axis rotary metal shadowed immunolabelled specimens allow the detection of small colloidal gold markers in the backscattered electron-image. High topographic resolution is obtained in the secondary electron-image

Optical imaging of the effect of in-plane fields on cholesteric liquid crystals

Sharon A. Jewell and J. Roy Sambles, Physical Review E, Vol. 78, article 012701 (2008). Copyright © 2008 by the American Physical Society.The effects of in-plane electric fields on the director structure of cholesteric liquid crystals has been imaged in three dimensions using fluorescence confocal polarizing microscopy. The results show that a liquid crystal lying outside the electrode gap can be significantly affected by stray fields occurring above the electrode surface, resulting in a 90° rotation of the cholesteric helix. Distinct differences between the behavior of cholesterics with positive and negative dielectric anisotropies are observed

Helium irradiation effects in polycrystalline Si, silica, and single crystal Si

Transmission electron microscopy (TEM) has been used to investigate the effects of room temperature 6 keV helium ion irradiation of a thin (≈55 nm thick) tri-layer consisting of polycrystalline Si, silica, and single-crystal Si. The ion irradiation was carried out in situ within the TEM under conditions where approximately 24% of the incident ions came to rest in the specimen. This paper reports on the comparative development of irradiation-induced defects (primarily helium bubbles) in the polycrystalline Si and single-crystal Si under ion irradiation and provides direct measurement of a radiation-induced increase in the width of the polycrystalline layer and shrinkage of the silica layer. Analysis using TEM and electron energy-loss spectroscopy has led to the hypothesis that these result from helium-bubble-induced swelling of the silicon and radiation-induced viscoelastic flow processes in the silica under the influence of stresses applied by the swollen Si layers. The silicon and silica layers are sputtered as a result of the helium ion irradiation; however, this is estimated to be a relatively minor effect with swelling and stress-related viscoelastic flow being the dominant mechanisms of dimensional change

Observations of Colloidal Gold Labelled Platelet Microtubules: High Voltage Electron Microscopy and Low Voltage-High Resolution Scanning Electron Microscopy

18 nm colloidal gold-antitubulin and 4 nm colloidal gold-antitubulin were used to label microtubules in adherent, fully spread platelets. Both sizes of marker effectively labelled microtubules in the partially extracted platelets. However only the 4 nm gold penetrated the dense microfilament matrix of the inner filamentous zone so that portions of microtubules within this cytoskeletal zone could be tracked. The gold marker could be visualized well with 1 MeV high voltage transmission EM and with 5 kV or greater secondary imaging or 20 kV backscattered imaging of carbon only coated samples. 1 kV secondary imaging permitted high resolution imaging of the surface of tubules and the microfilaments with their respective associated material. Individual gold-antibody complexes were difficult to identify by shape alone due to the tendency of the antibody coats to blend together when in very close approximation and due to the presence of other molecules or molecular aggregates similar in size to the gold-antibody labels. Microtubules were seen to wind in and out of the inner and outer filamentous zones as they encircled the granulomere. Some tubules were seen to dead end at the peripheral web. Numerous smaller microtubule loops were present principally in the outer filamentous zone and tubules could be followed as they went from the outer filamentous zone through the inner filamentous zone and into the granulomere

Towards the development of a hybrid-integrated chip interferometer for online surface profile measurements

Non-destructive testing and online measurement of surface features are pressing demands in manufacturing. Thus optical techniques are gaining importance for characterization of complex engineering surfaces. Harnessing integrated optics for miniaturization of interferometry systems onto a silicon wafer and incorporating a compact optical probe would enable the development of a handheld sensor for embedded metrology applications. In this work, we present the progress in the development of a hybrid photonics based metrology sensor device for online surface profile measurements. The measurement principle along with test and measurement results of individual components has been presented. For non-contact measurement, a spectrally encoded lateral scanning probe based on the laser scanning microscopy has been developed to provide fast measurement with lateral resolution limited to the diffraction limit. The probe demonstrates a lateral resolution of ∼3.6 μm while high axial resolution (sub-nanometre) is inherently achieved by interferometry. Further the performance of the hybrid tuneable laser and the scanning probe was evaluated by measuring a standard step height sample of 100 nm

Multi-interaction mean-field renormalization group

We present an extension of the previously proposed mean-field renormalization method to model Hamiltonians which are characterized by more than just one type of interaction. The method rests on scaling assumptions about the magnetization of different sublattices of the given lattice and it generates as many flow equations as coupling constants without arbitrary truncations on the renormalized Hamiltonian. We obtain good results for the test case of Ising systems with an additional second-neighbor coupling in two and three dimensions. An application of the method is also done to a morphological model of interacting surfaces introduced recenlty by Likos, Mecke and Wagner [J. Chem. Phys. {\bf{102}}, 9350 (1995)]. PACS: 64.60.Ak, 64.60.Fr, 05.70.JkComment: Tex file and three macros appended at the end. Five figures available upon request to: [email protected], Fax: [+]39-40-224-60

Low temperature expansion for the 3-d Ising Model

We compute the weak coupling expansion for the energy of the three dimensional Ising model through 48 excited bonds. We also compute the magnetization through 40 excited bonds. This was achieved via a recursive enumeration of states of fixed energy on a set of finite lattices. We use a linear combination of lattices with a generalization of helical boundary conditions to eliminate finite volume effects.Comment: 10 pages, IASSNS-HEP-92/42, BNL-4767

The Block Spin Renormalization Group Approach and Two-Dimensional Quantum Gravity

A block spin renormalization group approach is proposed for the dynamical triangulation formulation of two-dimensional quantum gravity. The idea is to update link flips on the block lattice in response to link flips on the original lattice. Just as the connectivity of the original lattice is meant to be a lattice representation of the metric, the block links are determined in such a way that the connectivity of the block lattice represents a block metric. As an illustration, this approach is applied to the Ising model coupled to two-dimensional quantum gravity. The correct critical coupling is reproduced, but the critical exponent is obscured by unusually large finite size effects.Comment: 10 page

A Multivariate Homogeneously Weighted Moving Average Control Chart

This paper presents a multivariate homogeneously weighted moving average (MHWMA) control chart for monitoring a process mean vector. The MHWMA control chart statistic gives a specific weight to the current observation, and the remaining weight is evenly distributed among the previous observations. We present the design procedure and compare the average run length (ARL) performance of the proposed chart with multivariate Chi-square, multivariate EWMA, and multivariate cumulative sum control charts. The ARL comparison indicates superior performance of the MHWMA chart over its competitors, particularly for the detection of small shifts in the process mean vector. Examples are also provided to show the application of the proposed chart. - 2013 IEEE.Scopu